Trb8300D ("Premium Line" - for turbidity Sensors InPro8600/D Series)

Общая информация
Подробнее
Документация
Принадлежности
{ptabslabels/customLabel}

Запросить подробную информацию Запросить коммерческое предложение

The Trb8300D is a transmitter for high accuracy measurements and process control. It accepts input from METTLER TOLEDO turbidity sensors InPro8600/D series. The measuring system can be used for applications in the beverage industry and brewery processes.

Запросить подробную информацию Запросить коммерческое предложение

Description

The light source, as well as the receiving silicon photodiodes, are placed in the sensor. The produced photocurrents are converted to turbidity values in the sensor and the resulting turbidity values are transferred to the transmitter via the RS485 cable. The photodiodes are placed in angles of 0°, 25° (forward scattered beam ) and 90° (sideward scattered beam) of the emitted light beam. The 0° detector measures the direct light, the 25° and 90° detectors measure the intensity of the scattered light.

Features and Benefits

Fast start-up and safe process control

Modern transmitter technology allows downloading configurations for traceable documentation and higher process safety.

Quick start-up

Three selectable dialog languages and online HELP texts allow user-friendly transmitter configurations.

Rapid process adaptation

Measurement results can be immediately displayed in application specific units such as FTU, NTU, EBC, ppm, g/l or ASBC.

Технические характеристики - Trb8300D ("Premium Line" - for turbidity Sensors InPro8600/D Series)

Measured units	FTU, NTU, EBC, ppm, g/l, ASBC
Диапазон измерения	0...400 FTU, 0...400 NTU, 0...100 EBC, 0...1000 ppm, 0...1.0 g/l, 0...7000 ASBC
Монтажные опции	cutout for panel installation 96 x 96 mm (3.78 x 3.78")
Защита	IP65, sealed face
Relays	2 programmable limit contacts, 1 WASH contact, 1 ALARM contact, HOLD input
Входы датчиков	1, digital
Communication	RS232
Current output	4 galvanic isolated outputs 0/4...20 mA
Features	3 configurable and storable parameters sets with remote access, factory defined and process calibration routines