Module M700 - CondInd 7700(X) (Inductive Conductivity Measuring Module)

Общая информация
Подробнее
Документация
Принадлежности
{ptabslabels/customLabel}

Запросить подробную информацию Запросить коммерческое предложение

The module CondInd 7700 is used for conductivity measurement with commercially available electrodeless (toroidal) sensors, particularly with METTLER TOLEDO’s inductive conductivity sensors of the InPro7250 series. The CondInd 7700X module is intended for operation in locations subject to explosion hazards which require equipment of Group II, device category 2(1), gas/dust.

Module M700 - CondInd 7700(X) (Inductive Conductivity Measuring Module)

Запросить подробную информацию Запросить коммерческое предложение

Features and Benefits

Sensor monitoring

SensoCheck, monitoring of primary coil and its lines for short circuit and secondary coil for open circuit, monitoring of the Sensocheck loop (GainCheck) with suitable sensors.

Concentration chart

To specify customer-specific solutions, 5 concentration values are entered in a matrix together with 5 temperature values.

Sensoface

Sensorface provides information on the sensor condition.

Технические характеристики - Module M700 - CondInd 7700(X) (Inductive Conductivity Measuring Module)

Диапазон измерения	0000 μS/cm...1999 mS/cm, resolution 1 μS/cm
Входы датчиков	for electrodeless (toroidal) inductive conductivity sensors InPro7250 series
Диапазон температур	Pt100/Pt1000: –50...+250 °C; NTC 30 kΩ, NTC 100 kΩ: –10...+150 °C
Suitable transmitters	M 700(X)
ISM	no
ATEX Certification	CondInd 7700X: ATEX II 2(1) G EEx ib [ia] IIC T4
FM approval	CondInd 7700: FM Class I Div 2